GNS S411 Fast Cure Silicone Sealant

GNS S411 Fast Cure Silicone Sealant 1.Glazing & Sealing 2.Acetoxy cure, one part RTV silicone sealant. 3.Faster cure

GNS S411 Fast Cure Silicone Sealant

Glazing & SealingAcetoxy cure, one part RTV silicone sealant.Faster cure

Test Parameter	Unit	Result
As Supplied Tested at 23°C and 50% RH
Specific Gravity	g/ml	0.97±0.02
Flow (sag or slump)	mm	0
Extrusion Rate Skin Time	ml/minute minute	150 5~10
Tack-free Time	hour	≤1.0
Curing time (5mm)	hour	≤12
As Cured-after 21 days at 23°C and 50% RH
Durometer Hardness, Shore A	Points	22
Movement Capability	%	±25
Tensile/Modulus at 50% Elongation	Mpa	0.24
Tensile/Modulus at 100% Elongation	Mpa	0.28
Ultimate Tensile Strength Ultimate Elongation at Break	Mpa %	0.32 250

Product DescriptionAcetoxy cure, one part RTV silicone sealant.Faster cure than normal silicone sealant.Can be applied on glass, ceramics vitreous enamels. shelves, counter cabinets, signs and many other building materials. Product FeaturesEasy to use - one part, no mixing required. Can be dispensed with an ordinary caulking gun.Cures to a strong, flexible seal capable of withstanding movement in and around the joint.Acetoxy cure; Fast cure.Can be applied in any season.Excellent resistance to weathering, UV light, vibration, moisture, ozone, temperature extremes, airborne pollutants,cleaning detergents and many solvents.Non-slumping; can be used in vertical and overhead joints. Application Apply to clean, dryand grease-free surfaces. Cut the nozzle at 45°angle to the desired shape size. Screw nozzle on the cartridge .Place cartridge in the caulking gun. Apply sealant into the base ofthe joint so that it can completely fill the joint. Tool the surface of thejoint immediately after sealant application to provide a smooth even finish andensure thesealant wets both sides of the joint. Remove the masking tape after tooling. Usein well-ventilated areas. ColourWhite, black , aluminum, translucent. Storeage & Shelf life12 months store in shade, cool and well ventilated place under 25°C

CautionUncured siliconecan irritate eyes and skin. If contact is made with eyes, flush with water for15 minutes and seek medical advice. Use in well ventilated area andKeep out of reachfor children.

GNS S411 Fast Cure Silicone Sealant